Before you start, ensure you’ve read the Pre-requisites to start with development.
See also
This is a short guide on how to send your patches to LAVA. The LAVA team uses the gerrit code review system to review changes.
If you do not already have a Linaro account, you will first need to Register with Linaro as a Community contributor.
So the first step will be logging in to gerrit and uploading you SSH public key there.
There are two main components to LAVA, lava-server
and
lava-dispatcher
.
git clone https://git.linaro.org/git/lava/lava-server.git
cd lava-server
git clone https://git.linaro.org/git/lava/lava-dispatcher.git
cd lava-dispatcher
There is also lava-tool
which is gaining more support for operations
involving the Lava Dispatcher Design:
git clone https://git.linaro.org/git/lava/lava-tool.git
cd lava-tool
If you have not done so already, git review
needs to be setup for each
clone of each source:
git review -s
We recommend never working off the master branch (unless you are a git expert and really know what you are doing). You should create a topic branch for each logically distinct change you work on.
Note
Unless your change directly depends on changes made in an earlier commit on a branch, this means making a fresh branch for each change with one commit per branch.
Before you start, make sure your master branch is up to date:
git checkout master
git pull
Now create your topic branch off master:
git checkout -b my-change master
Extra dependencies are required to run the tests. On Debian based
distributions, you can install lava-dev
.
To run the tests, use the ci-run
script:
$ ./ci-run
See also Testing the new design.
Unit tests cannot replicate all tests required on LAVA code, some tests will need to be run with real devices under test. On Debian based distributions, see Developer package build. See Writing a LAVA test definition for information on writing LAVA test jobs to test particular device functionality.
Make sure that your changes do not cause any failures in the unit tests:
$ ./ci-run
Wherever possible, always add new unit tests for new code.
From each topic branch, just run:
git review
If you have multiple commits in that topic branch, git review will warn you. It’s OK to send multiple commits from the same branch, but note that:
Therefore the recommentations are:
There is a convention within the LAVA software team that reviews which have no
reviewers other than the automatic lavabot
are ignored for review. This
allows developers to share changes at an early stage when more than one
developer is working on a single change or when another developer needs to base
their changes on work being done by someone else.
Therefore, until you add reviewers to your new review, it will not receive attention and is not going to be merged.
There is a shortcut available in gerrit to add the complete team as reviewers,
simply click Add in the Reviewers section and enter lava-team
in the
drop-down box and confirm by pressing Add in the drop-down box.
When reviewers make comments on your change, you should amend the original commit to address the comments, and not submit a new change addressing the comments while leaving the original one untouched.
Gerrit handles this by adding a ChangeId to your commit message. Keep this Id unchanged when amending commit messages.
Locally, you can make a separate commit addressing the reviewer comments, it’s not a problem. But before you resubmit your branch for review, you have to rebase your changes against master to end up with a single, enhanced commit. For example:
$ git branch
master
* my-feature
$ git show-branch master my-feature
! [master] Last commit on master
! [my-feature] address revier comments
--
+ [my-feature] address reviewer comments
+ [my-feature^] New feature or bug fix
-- [master] Last commit on master
$ git rebase -i master
git rebase -i
will open your $EDITOR
and present you with something
like this:
pick xxxxxxx New feature or bug fix
pick yyyyyyy address reviewer comments
You want the last commit to be combined with the first and keep the first
commit message, so you change pick
to fixup
ending up with somehting
like this:
pick xxxxxxx New feature or bug fix
fixup yyyyyyy address reviewer comments
If you also want to edit the commit message of the first commit to mention
something else, change pick
to reword
and you will have the chance to
do that. Just remember to keep the Change-Id
unchanged.
NOTE: if you want to abort the rebase, just delete everything, save
the file as empty and exit the $EDITOR
.
Now save the file and exit your $EDITOR
.
In the end, your original commit will be updated with the changes:
$ git show-branch master my-feature
! [master] Last commit on master
! [my-feature] New feature or bug fix
--
+ [my-feature] New feature or bug fix
-- [master] Last commit on master
Note that the “New feature or bug fix” commit is now not the same as before
since it was modified, so it will have a new hash (zzzzzzz
instead of the
original xxxxxxx
). But as long as the commit message still contains the
same Change-Id
, gerrit will know it is a new version of a previously
submitted change.
After placing a few reviews, there will be a number of local branches. To keep
the list of local branches under control, the local branches can be easily
deleted after the merge. Note: git will warn if the branch has not already been
merged when used with the lower case -d
option. This is a useful check that
you are deleting a merged branch and not an unmerged one, so work with git to
help your workflow.
$ git checkout bugfix
$ git rebase master
$ git checkout master
$ git branch -d bugfix
If the final command fails, check the status of the review of the branch. If you are completely sure the branch should still be deleted or if the review of this branch was abandoned, use the -D option instead of -d and repeat the command.
If you haven’t got a clone handy on the instance to be used for the review, prepare a clone as usual.
Gerrit provides a number of ways to apply the changes to be reviewed, so set up a test branch as usual - always ensuring that the master branch of the clone is up to date before creating the review branch.
$ git checkout master
$ git pull
$ git checkout -b review-111
To pull in the changes in the review already marked for commit in your local
branch, use the pull
link in the patch set of the review you want to run.
Alternatively, to pull in the changes as plain patches, use the patch`
link
and pipe that to patch -p1
. In this full example, the second patch set of
review 159 is applied to the review-159
branch as a patch set.
$ git checkout master
$ git pull
$ git checkout -b review-159
$ git fetch https://review.linaro.org/lava/lava-server refs/changes/59/159/2 && git format-patch -1 --stdout FETCH_HEAD | patch -p1
$ git status
Handle the local branch as normal. If the reviewed change needs modification and a new patch set is added, revert the local change and apply the new patch set.
All developers are encouraged to write code with futuristic changes in mind, so that it is easy to do a technology upgrade, which includes watching for errors and warnings generated by dependency packages as well as upgrading and migrating to newer APIs as a normal part of development.
This is particularly true for Django where the lava-server
package needs to
retain support for multiple django versions as well as monitoring for
deprecation warnings in the newest django version. Where necessary, write code
for different versions and separate with:
import django
if django.VERSION > (1, 8):
pass # newer code
else:
pass # older compatibility code
LAVA recommends Debian Jessie but also supports testing and unstable which have a newer version of python-django.
Database migrations on Debian Jessie and later are managed within django. Support for python-django-south has been dropped. Only django migration types should be included in any reviews which involve a database migration.
Once modified, the updated models.py
file needs to be copied into the
system location for the relevant extension, e.g. lava_scheduler_app
. This
is a step which needs to be done by the developer - developer packages
cannot be installed cleanly and unit tests will likely fail until the
migration has been created and applied.
On Debian Jessie and later:
$ sudo lava-server manage makemigrations lava_scheduler_app
The migration file will be created in
/usr/lib/python2.7/dist-packages/lava_scheduler_app/migrations/
(which is
why sudo
is required) and will need to be copied into your git working copy
and added to the review.
The migration is applied using:
$ sudo lava-server manage migrate lava_scheduler_app
See django docs for more information.
LAVA dispatcher now supports python3 testing but only for the pipeline unit
tests. Code changes to the V2 dispatcher code (i.e. in the
lava_dispatcher/pipeline
tree) must be sufficiently aware of Python3 to
not break the unit tests when run using python3.
LAVA is not yet ready to use python 3.x support at runtime, particularly in
lava-server, due to the lack of python 3.x migrations in dependencies. However
it is good to take python 3.x support into account in lava-server
, when
writing new code for LAVA v2, so that it makes it easy during the move anytime
in the future.
All reviews run the lava-dispatcher.pipelnie
V2 unit tests against python
3.x and changes must pass without breaking compatibility with python 2.x
The ./ci-run
script for lava-dispatcher
shows how to run the python3
unit tests:
# to run python3 unit tests, you can use
# python3 -m unittest discover -v lava_dispatcher.pipeline
# but the python3 dependencies are not automatically installed.
The list of python3 dependencies needed for the pipeline unit tests is maintained as part of the functional tests:
https://git.linaro.org/lava-team/refactoring.git/tree/functional/dispatcher-pipeline-python3.yaml
From time to time, reviews may add more python dependencies - check on the Mailing lists if your tests start to fail after rebasing on current master or if you want to help with more python3 support in LAVA V2.
Avoid making changes to LAVA V1 code for python3 - only LAVA V2 is going to support python3.
Each of the installed django apps in lava-server
are able to expose
functionality using XML-RPC.
from linaro_django_xmlrpc.models import ExposedAPI
class SomeAPI(ExposedAPI):
The docstring
must include the full user-facing documentation of
each function exposed through the API.
Authentication should be supported using the base class support:
self._authenticate()
Catch exceptions for all errors, SubmissionException
, DoesNotExist
and others, then re-raise as xmlrpclib.Fault
.
Move as much of the work into the relevant app as possible, either in
models.py
or in dbutils.py
. Wherever possible, re-use existing
functions with wrappers for error handling in the API code.
/etc/lava-server/instance.conf
is principally for V1 configuration. V2 uses
this file only for the database connection settings on the master, instance
name and the lavaserver
user.
Most settings for the instance are handled inside django using
/etc/lava-server/settings.conf
. (For historical reasons, this file uses
JSON syntax.)
Pylint is a tool that checks for errors in Python code, tries to enforce a coding standard and looks for bad code smells. We encourage developers to run LAVA code through pylint and fix warnings or errors shown by pylint to maintain a good score. For more information about code smells, refer to Martin Fowler’s refactoring book. LAVA developers stick on to PEP 008 (aka Guido’s style guide) across all the LAVA component code.
pylint
does need to be used with some caution, the messages produced should
not be followed blindly. It can be very useful for spotting unused imports,
unused variables and other issues. To simplify the pylint output, some warnings
are recommended to be disabled:
$ pylint -d line-too-long -d missing-docstring
Note
Docstrings should still be added wherever a docstring would be useful.
pylint
also supports local disabling of warnings and there are many
examples of:
variable = func_call() # pylint: disable=
There is a pylint-django
plugin available in unstable and testing and
whilst it improves the pylint output for the lava-server
codebase, it still
has a high level of false indications.
In order to check for PEP 008 compliance the following command is recommended:
$ pep8 --ignore E501
pep8 can be installed in debian based systems as follows:
$ apt install pep8
LAVA has set of unit tests which the developers can run on a regular basis for
each change they make in order to check for regressions if any. Most of the
LAVA components such as lava-server
, lava-dispatcher
, lava-tool have unit tests.
Extra dependencies are required to run the tests. On Debian based distributions, you can install lava-dev.
To run the tests, use the ci-run / ci-build scripts:
$ ./ci-run
See also
Testing the new design for examples of how to run individual unit tests or all unit tests within a class or module.
LAVA database models can be visualized with the help of django_extensions along with tools such as pydot. In debian based systems install the following packages to get the visualization of LAVA database models:
$ apt install python-django-extensions python-pydot
Once the above packages are installed successfully, use the following command
to get the visualization of lava-server
models in PNG format:
$ sudo lava-server manage graph_models --pydot -a -g -o lava-server-model.png
More documentation about graph models is available in https://django-extensions.readthedocs.org/en/latest/graph_models.html
Other useful features from django_extensions are as follows:
shell_plus - similar to the built-in “shell” but autoloads all models
validate_templates - check templates for rendering errors:
$ sudo lava-server manage validate_templates
runscript - run arbitrary scripts inside lava-server
environment:
$ sudo lava-server manage runscript fix_user_names --script-args=all
Default configurations use a side-effect of the logging behaviour to restrict
access to the lava-server manage
operations which typical Django apps
expose through the manage.py
interface. This is because lava-server
manage shell
provides read-write access to the database, so the command
requires sudo
.
On developer machines, this can be unnecessary. Set the location of the django
log to a new location to allow easier access to the management commands to
simplify debugging and to be able to run a Django Python Console inside a
development environment. In /etc/lava-server/settings.conf
add:
"DJANGO_LOGFILE": "/tmp/django.log"
Note
settings.conf
is JSON syntax, so ensure that the previous line
ends with a comma and that the resulting file validates as JSON. Use
JSONLINT
The new location needs to be writable by the lavaserver
user (for use by
localhost) and by the developer user (but would typically be writeable by
anyone).